The Vaporesso Tarot Nano is a stealth vaping mod that uses the OMNI Bard chipset to offer various vaping functions, including Smart VW mode, CCW mode, TC mode, CCT mode, and bypass mode. It features a VECO tank with EUC coil for optimal e-juice performance. The device has a diameter of 69x38x22.5mm and supports VW/VT (Ni200, SS, Ti, TCR) BYPASS,CCW, CCT, and Smart mode.
The Tarot Nano Kit maintains the beautiful design of the Tarot family, but is smaller and more exquisite. It can handle atomizers with resistances between 0.15ohm and 5.0ohm and can achieve a wattage maximum of 80w and a temperature range of 200 to 600F. The OMNI board allows users to easily switch between modes.
To set the mode, press the mode button to choose among M1, M2, and press the up or down button to increase or decrease the TCR value according to your preference. The wattage maximum is 80w and the temperature range is 200 to 600F. The Tarot Nano can handle atomizers with resistances between 0.15ohm and 5.0ohm.
The Smart VW mode ensures the mod’s ability to skillfully select the appropriate average wattage for vaping. If the wattage is not suitable, set it to the bottom of the range and gradually increase it until you find a vape you like.
In summary, the Vaporesso Tarot Nano is a stealth vaping mod that offers various vaping functions and features. Its compact design and easy operation make it an excellent choice for those looking for a small, yet powerful device.
📹 Vaporesso Tarot Nano Kit Setup by Vapouroxide
Short video demonstrating how to set up the Vaporesso Tarot Nano Starter Kit straight out the box using the included EUC …
📹 Tarot Nano Kit By Vaporesso! Quick Glance!
And just to give you a better idea here’s the tare pro next to stare at nano I mean this thing is tiny. Like I mentioned before just like …
Would you consider this a good device to add to my shop? We need some new blood, lol, (hardware) in here & I never know exactly what to get. I still have some items we got in when we opened almost 3 1/2 years ago, & I’m going to have to mark them down just to move them out of my shop to make room for the newer advanced devices. Your opinion means the world to me. I’ve told you this before, but I use your articles to “teach” my new hires so they can get familiar with products. Hell, I watch you to learn as well, & hopefully find new devices that are worth spending the money on, praying that they will sell. I PROMISE not to hold you accountable if something doesn’t sell. It’s our choice what we buy, I just would like to know what others think beforehand. A reply would make my day!! Thanks!
Hello all.. I’ve had the Tarot Nano for a few months now. Worked great until recently. No matter which juice I use and I have changed out my coils many times..but I keep getting a burnt taste. Although, I have watched & read reviews on this problem and nothing seems to fix the issue. I really don’t want to upgrade since this was recently purchased and not cheap either. Any ideas why this keeps happening and what else to do. Thanks
hi, I’ve got a vaporesso tarot nano and I use it on smart watt mode, each time I unscrew the tank and put it back I get different readings on the coil resistance and therefore different suggested wattage, the resistance vary between 0.5 to 1.5 ohm for the exact same coil, do you know what could be the problem?
I just got into vaping about 3 weeks ago. I had no clue what I was getting into. I have a little bit more knowledge than I did, but I’m still getting frustrated. I bought a Fuhattan mod, and a Plume Viel RDA of of a old buddy. Fucked up the threads on first Fuhattan, and just got the second in the mail. Which I now realize is old technology. I also got a brand new Dark Horse RDA that came with the mod. My problem is on the Plum Veil I cant get the top part with the drip tip to come off the part with the air flow holes. On the Dark Horse I can’t get the base off the barrel to get to the leads. I’m scared to use vice grips or pliers.I don’t want to grab it with pliers by the pin and mess up the threading. Is there some trick to pop them out of the barrel ? Would a little oil for hair clippers on the o-ring help ? I’m so tired of messing with it that I just went back to the KangerTech Subvod I started with. I know it takes time, but maybe I’m just not mechanically inclined and should stick with the beginner devices.
WARNING Don’t purchase vaporesso, they’re one of the worst vape companies out there. I recently purchased the quite expensive, luxe-s mod with skrr-s tank & boy did the headaches start. They claimed that “it doesn’t leak” & “with great flavor” when infact it does leak when the room gets a little warm, & leaks excessively when you put it in your pocket, & the flavors mute in their new skrr-s QF coil (which they lied in their advert about it being “intense flavor”). Even ignoring & trying REALLY hard to think of the positives, they still managed to pretty much lie & get me pissed off further. Since the new QF coil had mute flavor (which many speculate it’s because of the bullet shape airflow) I decided to get their older GT Mesh coils to substitute for the QF Mesh coil (since they advertised them being compatible with the skrr-s) so after installing, priming, & letting it marinate for literally an hour, after 3 puffs, it starts leaking like nothing I’ve ever seen before. 8ml tank full of 70% PG e-juice, nearly gone after leaking all over the whole mod. You’d think that would be the worst of it right? Now, I can go to vaporesso directly & get a replacement tank or something right, or get some sort of resolution right? Nope, not even close, I had the unfortunate encounter with a female representative of vaporesso who not only would respond a few days at a time, but literally wasted my time telling me to “clean & tighten the tank” like I’m some sort of inbred moron who didn’t try that the very first time the e-juice ran down my leg looking like I just jizzed, it was just a mess from the very fucking start.