This video provides a step-by-step guide on replacing a motor on a Sta-Rite Dura-Glas and Max-E-Glas pool pump. If your Sta-Rite Dura-Glas pool pump motor has stopped working, it’s likely time for a motor replacement. This guide includes a step-by-step procedure for replacing a motor on a Sta-Rite Max-E-Pro pool pump, which features a Max-E-Pro motor.
Common tools needed to replace the motor include screwdrivers (Phillip head and flat), 9/16″ socket wrench, 7/16″ open end wrench, channel wrench or strap wrench, and silicon gasket lubrication. The STA-Rite SUPERMAX installation and user manual can be found online.
To replace the motor, spin the impeller until the wrench locks down on the shaft and spin it counter-clockwise until it comes off. Remove the two screws holding the rear cover of the motor in preparation for removal. Carefully install the seal head on to the impeller by twisting it on and pressing it to butt up to the back of the impeller.
In conclusion, this video provides a step-by-step guide on how to replace a motor on a Sta-Rite pool pump, including the installation of the seal head and pump seal. It also provides expert tips and common mistakes to avoid potential issues.
📹 How To Replace A Sta-Rite Dura-Glas Pool Pump Motor
In this video, we explain how to replace the motor on a Sta-Rite Dura-Glas pool pump. We replace a single speed pool pump …
How long does it take to replace a pool pump motor?
Pool pumps typically last eight to 12 years before needing replacement due to wear and tear on pool parts. Modern pool pumps use less energy due to variable speeds, making them more cost-effective. If your older pump has deteriorating fiberglass, consider replacing it with a variable-speed pump.
Pool pumps are designed to run quietly, so any unusual noises may indicate a motor failure. Loud screeching or grinding sounds usually indicate rust from a leaky shaft seal. Always Clear Pool Cleaning and Repair can replace motors quickly and efficiently or provide a complete pump replacement.
If your pump keeps turning off on its own, it may be a sign that the motor is reaching too high temperatures and shutting off until it cools down and restarts. A proper diagnosis requires inspection, and it is essential to call a trained pool repair professional like Always Clear Pool Cleaning and Repair in Brevard County. Delaying repairs often results in the need for a replacement, as failing pump components will worsen over time.
How do I know if my pump motor is bad?
The ball bearings near the back of the pool pump motor can cause noises like squeaking, grinding, and humming. While ball bearings can be replaced, motor replacement is the best and most lasting option. If the motor makes a humming noise, it may be a capacitor failing or the motor seized. If the motor overheats, it’s working too hard and needs to be replaced, often due to a blockage in the filtration system. It should be hot enough to touch, but not so hot that it can’t be touched for a few seconds.
Vibrations from the pool pump motor may indicate a loose part or strain, but unusual vibrations do not necessarily indicate motor replacement. An unstable or uneven base can also cause vibrations and rattling.
Can I replace just the motor on my pool pump?
If your pool pump motor is dead and repair isn’t possible, it’s time for a replacement. Common reasons for motor replacement include failed bearings, corrosion, failed start and run capacitors, and motor age. To replace your pool pump motor, follow these tips:
Check for any signs of damage, such as rust or corrosion, and replace them promptly.
Check for any signs of damage, such as a broken pump or a damaged capacitor.
How do you bleed air from a well pump?
To guarantee an even water flow and the expulsion of air from your water line, it is recommended that all faucets in your residence be opened by turning the tap on a half-turn, commencing with the faucets situated in closest proximity to your well’s main water valve.
Is it worth fixing a pool pump?
A pump over five years old should be replaced if the repair cost exceeds half the cost of a new pump. If the pump body cracks, the entire cost of a new pump is still spent. A 2. 0 HP pool pump costs about $0. 25/hour to operate, resulting in $750. 00 per year. A variable speed Jandy E-Pump costs on average $. 035/hour to operate on a basic pool, resulting in $150. 00 per year if running 12 hours per day. The cost will increase slightly if using the spa or water features.
How do you know if your pool motor is bad?
The age of your pool pump is an early trouble sign, as it can indicate issues such as noise, power trip, shutting off the pump motor, or loss of suction. The pool pump is the heart of the pool, ensuring the water flows through filters, heaters, and chlorinators. If the pump fails, the pool can turn into a swamp, causing the water to become stagnant. It is crucial to catch problems early and call for pool pump replacement.
It is not rocket science to check for these signs, but a good pair of eyes and ears can help. There is no need to open or disassemble anything to check for these signs. A good pair of eyes and ears are all you need to do. Just keep an eye on your pool to know when to call for help and how to keep it from turning green.
Age alone doesn’t mean the pump isn’t working, but if your pump is older than most cars on the road, it’s time to keep a close eye on your swimming pool pump and motor.
What is the life expectancy of a pump motor?
The chart demonstrates that pump life can be reduced to 1, 440 hours if operated simultaneously at maximum pressure and speed. However, if run at reduced conditions of 2, 000 PSI and 1, 000 RPM, it can achieve a life rating of 67, 500 hours. Factors affecting pump life include ideal circuit conditions, which can lead to failures due to the natural end of shaft bearings. The pump manufacturer has stated the expected bearing life under specified conditions, but they have no control over operating conditions. The system designer is responsible for providing favorable operating conditions, and if not, it is not the pump’s fault if it prematurely and unexpectedly fails.
How to prime a sta rite well pump?
Prior to initiating the operation of the pump, it is imperative to ascertain that all valves and hoses on the discharge side are in an open position. It is then necessary to fill the pump and suction pipe with water. In the event that a priming tee and plug are provided for a long horizontal run, the suction pipe should be filled through it.
How much does it cost to replace a pool pump motor?
Pool pump motor replacement costs typically range from $65 to $650, with the cost being about 75 percent of the total cost. This is more affordable if the pump is expected to last for at least a few more years. Pool pumps typically last eight to 15 years, so if the motor is old and the pump is over 10 years old, it may be more cost-effective to replace the entire unit. Single-speed pool pumps, which pump water at the same speed when turned on, are no longer manufactured as of 2021 due to non-compliance with energy efficiency standards set by the Department of Energy.
What is the primary cause of pump motor failure?
Electric pumps, which are imported from around the world into Australia, generate a significant amount of heat on their own, which is the most common reason for their failure. Even the best pumps can develop problems, leading to downtime. The five most common issues with electric pump motors include excessive heat generation, which is the main cause for the other four failures. It is important to note that these problems are preventable and can be addressed by adjusting the design and usage of the pump. Despite the importance of importing the best pumps from around the world, many problems can still occur.
What is the life expectancy of a pool pump motor?
Pool pump motors typically last 8-12 years before needing replacement. However, frequency of use can impact their lifespan. Pools with regular use may need to be replaced sooner than those with occasional use. Other factors that can impact the motor’s lifespan include residential, commercial, weekly, seasonal, and hot tub/spa services. Other services include automatic pool cleaners, chlorinators, filters, gas heaters, handrails, pool heat pump services, pool pumps, spa blowers, and pool automation.
📹 How to Replace Pool Pump Motor Sta-Rite / Century
Reminder, Im not an electrician and working with electric is dangerous so if you are unsure or are unfamiliar with electrical codes …
Why do you keep calling the impeller a turbine fan????? Why didn’t you change both halves of the shaft seal???? Why did you call the wires positive and negative???? I’ll be very honest with you, If I were you, I would go back through that whole article and do a lot of editing before you get someone killed. Some pump motors are wired with 220, some are wired with 110 and you made no effort at all to explain the difference. Sta-Rite by the way is pump manufacturer that was bought by Pentair over a decade ago, and Century just makes the electrical portion… the motor.