Rit Color Remover is a non-chlorine bleach that can be used to remove or reduce color from fabric before dyeing with Rit Dye. It works on cotton, linen, silk, wool, ramie, and rayon, and can be used in stove top, sink, or washing machine methods. The product breaks down dye molecules and restores the vibrancy of fabric.
Reverse tie-dye uses Rit Color Remover to remove the color of garments, revealing a unique, high-contrast pattern. To use Rit Color Remover powder, start by washing fabric in warm soapy water. This chlorine-free product can be used for different types of fabric and is available at major retailers.
Rit Color Remover works by breaking down and removing dye molecules from the fabric, essentially reverses the development of color when exposed to oxygen. It is extremely wash fast, lightfast, and can be used on various fabrics. However, it cannot remove patterns or prints from a fabric or indigo colors from jeans.
When the desired color is achieved, remove from the dyebath. Fabric will look darker when wet and dry lighter. To enhance the color and reduce color bleeding, use Rit Color Remover powder.
The Carbona Color Run remover is a milder version of bleach that doesn’t contain chlorine, making it better for fabrics. However, it may not work 100% as advertised.
In summary, Rit Color Remover is an easy-to-use product that can remove color from fabric before dyeing or as a pre-treatment for stained or faded fabric. It works on various fabrics and can be used in various methods, such as stove top, sink, or washing machine.
📹 Rit Dye 101 – Color Remover
Https://www.ritstudio.com Rit Color Remover is used primarily to remove or reduce color from fabric prior to dyeing with Rit Dye.
📹 How to Dye with Rit All-Purpose Liquid Dye
Man…THAT WORKED! Had a pair of blue-black Levi 511’s that unfortunately lightened in the laundry last year after washing and drying incorrectly. Thought there was no way to get them back to that deep deep dark washed look. I’ve..never..dyed..anything..ever..before…Tried RIT Indigo with a touch of RIT Black for a full 30 minutes at just a bit higher dye concentration and BINGO!! Man they look sharp!..Thank..you!!
My mother used to dye clothes, sheets, etc, all the time. Wasn’t this complicated. Fill the washer with hot water, add Rit dye, (she always used the boxes, not bottles of Rit), add some Ivory laundry soap or Woolite, stir with a broom handle or agitate on delicate for a minute or two, turn washer off and let clothes soak for 30 minutes or so, can’t remember. Then, turn the washer back on to drain and rinse. I was just checking because I’m getting ready to dye bath towels and a bath rug and was checking the steps. Think I’ll do it mom’s way. Always worked for her.
My white jumpsuit got stained so I couldn’t wear it. I dyed it red and it came out such a nice shade 😆I used salt and dish soap in a 12 quart bucket, made sure to stir it around a lot, I put about 3/4th of the bottle and did it over my sink. I would say for about 15-20 min. Also def recommend some gloves because I stained my hands.
Why is it that if you straight dye you only need to leave it for 10-30 minutes for best results, but if you tiedye (using squeeze bottle method) you have to leave it for 4-6 hours, with 2 hours being the absolute minimum if you’re in a super rush or whatever (it’ll still work)? I have always wondered that. I used to think it was bc, when you submerge-dye, you can keep it on a stovetop and piping hot the entire time, whereas tiedye obviously gets cooler as you’re working…. but I’ve since noticed that they recommend short times even when it’s not directly on the stove- like in this article or many others I’ve seen. I’m legitimately asking about the science behind it as I am a professional designer and many of my clothes that I sell are dip dyed or tie-dyed. It’s just so bizarre to me that the difference would be THAT great. And I’ve never heard anyone say anything like, “If you can keep the dye in the bottle piping hot, you don’t need to leave it as long.” Like, I dye my items with a bottle with a beer cozy over the bottle so it stays hot, and doesn’t burn me lol, and then I let it sit on a shelf directly above my oil burner (kids: that’s the thing that makes the heat that heats your house in the winter) to keep it very warm while setting. So yeah, I just don’t see why it would be the difference of 20minutes versus four hours lol…. or is it more about letting the dye disperse? But again…. I’ve never heard anyone say that….
This was a lifesaver for me. I bought my boyfriend And I all black roots tracksuits and like the second time wearing it we were spraying bleach on our floors cleaning up a mess totally forgetting the fact that the mist could turn our clothes orange… and so it did. Oh man i was so upset . Mines got ruined much worse. I used this dye and fixed it. I noticed that the black i used is a little darker then the actual tracksuit so if you look super close you can see the line of the 2 colours but, it looks so much better then orange spots.
Going to try this: I boiled roughly 2 gallons of water (after a bit I just used hot tap water to speed up the process) Then I added salt and a little detergent to the hot water Dampened 3 small shirts, 100% cotton, and added them to the hot water Poured some dye as I mixed Stirred for 10 minutes Rinsed with cold water (I decided to pass on the fixative) Then I washed them in warm water. Then I might lay them out to dry, or I’ll use the drying machine (?) Edit: just layed them out to dry. It appears as though the dye was distributed unevenly. This could be because I added the dye after putting the shirts in and not before. The color looks really good though. Edit: Shirts are dry. Definitely uneven coloring – if you want a solid unbroken color then ensure the dye is mixed in with the hot water mixture before adding the clothes. Overall, good stuff. Might practice more in the future. Thanks for the product.
If I dye some faded blue jeans (cotton) to black and I don’t use color fixation will the black dye stain light colored fabrics such as a white shirt or socks (just by wearing them and rubbing up against the pants), maybe sitting on light furniture? This of course considering that I dyed the pants in Hot water and salt.
Question, if you dye polyester, what is better to add ? Salt or vinegar? Instructions don’t talk about much about polyester and I’m learning the hard way….I bought the wrong Rit and then color was washing completely off front the shirt 🙄, then I found out I have to get the Dye more version…etc, help pls
I have a pair of VERY dark Blue jeans and they got some spots of acrylic paint on them. I went according to the directions on line. First I tried Alcohol and let it set, then take something like a spoon and see of you can scrape any of it off then gently rub it to see if it moves it or not. No Go, so the next suggestion was hairspray. Still only lighter but so was that part of my jeans. If all else fails try straight laundry detergent so I tried that and it did get a little bit lighter but again, so did my pants. I just washed them in cold water to see if I made any headway. When they came out the paint was gone but the places where the paint was, now is very faded. Is it possible to dye a spots on a piece of clothing instead of the whole piece? I am just miserable that my new jeans are unwearable. When I wash my jeans normally I add vinegar to each wash to hold the color, especially the first wash. I am so mad I’m ready to go buy a dark blue permanent marker and see if it helps. Please tell me what to do!!! I saw a very dark blue color on line. What can I do!!!!??????
i bought a big piece of fabric to make a cape.. I thought it was black but whe i saw it in a better lighting i saw it was actually dark brown. But they didnt have anything black left so i bought it anyway thinking i could just dye it black.. I did everything in this tutorial even left the fabric submerged for 30mins.. It came out looking kind of black but after rinsing and rewashing it … its just exactly the same..
I accidentally bleached one of my favorite black shirts and got the black Rit Dye. Just tried this and did not work. I did everything in this article. I rinsed it with cold water then rinsed it again with warm water and mild detergent and the bleach spots came back. In conclusion, avoid this if you want to repair a accidental bleached shirt.
So quick 2 questions, for every pound of fabric it’s 1/2 cup of dye- and 3 gallons of water. Say my suit jacket is 2 pounds, I would use a full cup of dye, but do I keep 3 gallons of water or do I use 6 gallons of water?. (Probably a stupid question. But I just want to get it right.). And 2; with the salt or vinegar thing, what about polyester since suit/tux jackets are made of mostly polyester and cotton mix? Do I disregard salt or vinegar and just use the dye more bottle in the beginning of the article, in place or salt or vinegar? Or no salt or vinegar?
I did a few things wrong. I put the shirt in dry. I did not use salt. Its 68% cotton 28%polyester 4% spandex and I didn’t use the after treatment. 😢 it really came out looking bad. The shirt was already black. I’m trying to get it deeper black/less faded for a funeral. And its almost like the warm water took more color out. 😰
I have a cotton navy blue sweater and I think bleach got on it just a small area the size of an egg, it now has a reddish hue to it, darker red in the middle. Can I buy the navy blue color of your product and carefully put it only on my stain? I tried using rubbing alcohol to rub the blue back into the red but doesnt seem to work. I also put a water baking soda paste on it to keep it from spreading. Thanks
Any 40 y.o dudes out there who plan on doing this after this article hit me up: 1. Grab the biggest bucket on earth. 2. Dump all the RIT Dye bottle inside. 3. Gather everything faded over the last 20 years from shorts, pants, trousers, shoes, undies, wife beaters, socks, to flip flops and gloves with ugly fem colors and dump them in the bucket like a boss. If it doesn’t way 50 lbs, I did something wrong!
I bought the black dye but im a bit confused because I have patches of bleach stains on my black jeans. I only want to cover the bleached area, I dont know if it works if I use a small amount of the dye for it. Or if I dye the jeans fully in the tub like in the article, would the bleach stained area appear lighter than everywhere else?
I have my favorite black Nike hoodie and it just has a small single white threaded Nike tick and I want to dye the hoodie black to get the color back. BUT this bloody white Nike tick will go black. Any chance anyone knows how to save this white tick, I know it’s a stupid question. I’m thinking about just making the whole thing black
Really mad at Rit. Will never bother again with Rit. I wasted my money and my time. Did everything perfectly for my cotton bathroom curtain which had faded from the sun. But as soon as I rinsed my finished curtain, it looked exactly the way it did before I took it off the rod. Luckily I had not dumped out the die bath so re-soaked the dried curtain back into the die over night. The next morning I went back to Walmart to buy the dye fixative but my store did not carry it. Why should we have to pay double to buy the die and a fixative? Why wouldn’t dye work alone?
I have an old faded teal denim long dress. It has a few stains on it & looks dirty I want to dye it a darker color like brown, wine, or emerald green, was wondering will I get the desired color? It has white buttons, will it dye it? Should I get 2 bottles? Should I use vinegar for darker tones? Any recommendation of what color I should pick I don’t want the stain to be seen thx!!
i need help… so i got this yellow eyelash knit sweater (100% nylon) but the thing is, I hate the color yellow so I tried dying a dark color hoping its come out like brown or grey or something but only the little fuzzy eyelash parts caught color and the actual fabric is still yellow… What would y’all recommend I do??
I need help . I have Ugly tan curtains all threw the house I can’t afford new ones. 55% polyester 45% cotton blend. I want to color them what should I do? Buy? I tried bleaching them in the washing machine with no luck (chlorine bleach) and then I used RIT die from store .. didn’t do anything. What do I do and buy please?
I tried dying a swimsuit with the Rit DyeMore and it didn’t work, I follow the original instructions the first time and it didn’t work so the second time I tried using 2x the amount of dye, without the dish soap, and left it for days and it still didn’t turn black, does anyone have any ideas what I could do? I kinda don’t wanna do it a third time unless I know it’s gonna work cause I already spent like $20 on the dye with no result other that slightly staining an ugly streak into it. I used black dye BTW on a light blue swimsuit so it shouldn’t be that hard to stain..
This is the rich wealth tutorial. One who’s has that many buckets. Two no 2 many of us have a clean murder scene to dye out stuff in. 3 I had to do it in my pitch black dark backyard because I don’t have that much time after work. I agree with the other comment about her smile being fake. This is frustrating how long do I have to stir, how long to rinse, oh do it again for how long. This article should start by saying it will take hours to do. I’m frustrated super deeply by the ultra steps. Js
A quick question Please reply me I have just washed my grey couch sheets but some bleech stains are there even on pillows I have become too sad how I can fix it So by perusal this article I am not sure if it works for couch sheets too Please let me know which Rit dye is useful with salt or without it . Please help me Thanks
hello, i’m not even sure if i’ll get a response but i’m curious how black dye will work on these pants I ordered. They fit perfectly, but the fabric of the pants is white, with an ugly black pattern. I’m pretty sad, and I’m considering dying them fully black. Would Dying them black as shown here get them completely black, or would the ugly pattern still pop through?