New Tarot Card Sizing Techniques?

To cleanse your Tarot deck, place it on the table and set a clear intention for the cleanse. Light the sage smudge stick and blow on the open flames until they disappear. Let the smoke tendril rise, and fan the tarot cards through the smoke tendril. Stop when you feel ready. To cleanse new tarot cards, use a variety of methods such as smudging with sage or palo santo, using visualization techniques, or placing them under direct moonlight.

Cleaning your Tarot deck is an important step to clear any unwanted, unhelpful, or negative energy. To maintain the positive energy of your Tarot deck, hold the deck over the smoke and visualize the negative energy being released and replaced with positive energy. Some popular herbs for cleansing include sage, cedar, and palo santo.

To cleanse a new Tarot deck, light the incense and allow it to begin smoking then pass the cards through the smoke three times. Tune your attention to welcoming the cards and the relationship you are going to form with them into your home. The golden rule is that there is no action required to read tarot. You don’t have to smudge, sage, burn, or use a sage bundle or wand.

Crystals like selenite, clear quartz, and amethyst are commonly used to cleanse tarot cards. Place the crystal on top of the deck or the deck on top of the crystal. If you don’t cleanse your cards, they retain the energy they had before.

To cleanse tarot cards, follow these four easy steps: meditate, burn sage, pass each card through the smoke, and pack the cards up with a lighter. Remember to keep a lighter with you to relight the stick as needed. By following these steps, you can maintain the accuracy and potency of your Tarot deck and enhance your readings.

Do you cleanse a new tarot deck?

The author prefers to cleanse their tarot deck, not as a means to remove negative vibes but as a way to welcome it home and use it as a talisman. They have experienced gifted or received decks that were cleansed, and the proper owner usually appears after. The author prefers to use sacred smoke to cleanse paper items, such as Cedar, Juniper, Bay, and White Sage, with a clean, clear scent. They light the incense, allow it to start smoking, and pass the cards through the smoke three times. The author emphasizes the importance of welcoming the cards and the relationship they will form with them into their home.

How do I activate my tarot card?

This week’s Tarot Readers Academy – Tarot Cafe discusses eight ways to connect with your new Tarot deck. These include looking for strong reactions, sleeping with a card, performing a ritual, meditating on the images, daily draws, going steady, and interviewing the deck. The author shares their top 8 suggestions for connecting with your new deck, including stalking the post person, sleeping with a card, performing a ritual, meditating on the images, daily draws, going steady, and interviewing the deck. The transcription is available for those unable to watch the video.

Should I cleanse a new deck of tarot cards?

Cleanse your deck, whether new or second-hand, to remove residual energy, both good and bad. Consider the journey, storage, and atmosphere of your deck before cleaning it. New decks may have been impacted by manufacturing, transport, and handling. Once you get home, it will need a cleanse.

There are various ways to cleanse a deck, but the power lies in your intent, not the tools used. Crystals, candles, herbs, and incense can be fun and empowering, but the true magic lies in you. Avoid the witch aesthetic and focus on your intent.

If your deck is not brand new, start with the Major Arcana and then the four suits. Use the order that feels right to you within the suit, Aces to Kings, or Kings to Aces. Order the suits according to their seasonal correspondences, such as Wands (Spring), Cups (Summer), Pentacles (Autumn), and Swords (Winter).

Let your intuition guide you, as it’s your deck you’re connecting with. Remember, the power lies in your intent and not the tools used in the process.

How do I charge a new tarot deck?

The Full Moon is a popular method for recharging decks, offering manifesting energy and intuitive attributes. To use this energy, spread a cloth on the inner windowsill, spread out the deck, and place the crystal on top. Leave the deck out overnight to absorb the energy. If the sun is hot, be cautious of older or fragile decks that might “bake”. If the weather permits, leave the deck outside, ensuring the surface isn’t damp or damaging.

The earth will absorb any negative energy and imbue the cards with healing, grounding energy. If outside isn’t possible, leave the deck by an open window, but weigh them down in case of rogue gusts. This method can help recharge decks and promote healing and grounding energy.

How do you break in new tarot cards?

To break in a new deck of cards, start by shuffling them gently to soften them and make them move smoothly. Another quick and effective method is to rub cards over a table’s edge, rubbing them in all directions, including diagonals. This will quickly soften the cards and give them a bend. Be gentle yet persistent with your pressure, and you should end up with a well-broken deck.

Invest in fanning powder, mainly Zinc stearate, which repeals water and helps make cards move softly against each other. Apply it by pouring a small amount in a bag, shaking them around, and wiping off excess with a soft cloth. The powdery texture can last for a few uses, but eventually becomes almost velvety.

The power is white and can add a filmy look to black or dark-colored cards. Avoid using talc, as it absorbs moisture and will cause the cards to stick together. Overall, these methods will help you create a well-broken deck of cards.

Do I need to cleanse a new tarot deck?

Cleanse your deck, whether new or second-hand, to remove residual energy, both good and bad. Consider the journey, storage, and atmosphere of your deck before cleaning it. New decks may have been impacted by manufacturing, transport, and handling. Once you get home, it will need a cleanse.

There are various ways to cleanse a deck, but the power lies in your intent, not the tools used. Crystals, candles, herbs, and incense can be fun and empowering, but the true magic lies in you. Avoid the witch aesthetic and focus on your intent.

If your deck is not brand new, start with the Major Arcana and then the four suits. Use the order that feels right to you within the suit, Aces to Kings, or Kings to Aces. Order the suits according to their seasonal correspondences, such as Wands (Spring), Cups (Summer), Pentacles (Autumn), and Swords (Winter).

Let your intuition guide you, as it’s your deck you’re connecting with. Remember, the power lies in your intent and not the tools used in the process.

How to smudge new tarot cards?

Smudging is a practice that involves opening doors and windows, lighting a smudge stick, wafting smoke around an item or space, extinguishing the stick, and making a chiming noise. It is a common practice for tarot readers to cleanse their tarot cards and related tools, as well as their entire homes or reading space. The most common herb used is white sage, but other herbs like cedar or sweetgrass can also be used.

The most common smudging tool is sage, but incense can be used, and lavender, copal, and other herbs can also be added to attract positive or protective energy. The most powerful aspect of smudging is the intention and focus on cleansing and renewal.

How to shuffle new tarot cards?

The drop and smoosh method involves dropping tarot cards facedown on the floor and smooshing them around, similar to massaging them. Some cards may spin out, so read them to get your attention. The restacking technique involves placing a section of the deck in a new spot, repeating until the cards are suitable. This is helpful for large or small hands and overhand shuffling is not effective. The three-pile cut method is popular for clients who want something specific to do and helps them relax.

Start by shuffling the deck, then cut it into three separate piles, then read from one pile. This method is often used for a simple past, present, and future tarot reading, with the first pile representing the past, the second representing the present, and the third representing the future.

How do you cleanse tarot cards for the first time?

Tarot cards are a powerful tool for predicting the future, but they also carry negative and positive energy. To cleanse your deck, place it on top of crystals or inside a singing bowl. Crystals with cleaning properties include selenite, black tourmaline, and black obsidian. Leave your cards in sun or moonlight to draw out unwanted energies. Meditate with your deck or knock on them to release trapped energy between readings.

Organize your deck in order, starting with the Major Arcana, and recall their special meanings while arranging them. Shake the cards until they feel like new energy has entered them. This process helps balance the energies and provides a fresh slate for working with your tarot deck. Remember to use these methods to clear your deck of negative energy and create a positive outlook on your future.

What to do when you get a new set of tarot cards?

Prior to utilizing your newly acquired Tarot deck, it is recommended that you allot sufficient time for a comprehensive examination of each card. Additionally, it is advised that you perform the requisite actions of shuffling the deck, cleaning and blessing the cards, and conducting a reading to gain familiarity with the deck. This will facilitate the optimal utilization of the newly acquired Tarot expertise.

How do you bless new tarot cards?

The ritual involves invoking a Higher Force to bless a consecrated item, such as sacred cards, with the power of Truth. After meditating, sprinkle salt and water within the circle, saying “I banish all residual forces from this space of working”, and draw your circle anti-clockwise, saying “I close this place of working”. Any act done with intention is a magical act, and leaving the bag in gentle sunlight or moonlight for a day or night will also have the desired effect.