How To Use Aqua Rite To Examine The Software?

The Hayward Aqua Rite Salt Chlorine Generator (SCG) is a popular water treatment system that uses a series of diagnostics to detect and address common issues. To troubleshoot the system, follow these steps:

1. Slide the main switch to the AUTO position.
2. Switch your cell type by cycling the main switch from AUTO to SUPER CHLORINATE and then back to AUTO.
3. Push the diagnostic button until “T-XX” appears on the display.
4. If the cell is out, it’s usually a board issue. Take your current cell to a store that offers diagnostics, which often has a Hayward test machine that runs pass/fail tests on your cell to verify its condition.
5. The Hayward Aquarite Troubleshooting Guide provides step-by-step instructions to diagnose and resolve common issues with the AquaRite salt system, including power and salt level problems.
6. To manually reset the Inspect Cell LED, press and hold the Diagnostics button until the LED goes out (approximately 3 to 5 seconds).
7. Check the system to confirm that you have programmed the correct salt cell size. If you program the incorrect cell size, the salt will be affected.
8. The Hayward Aqua Rite Salt Chlorine Generator displays a total of 9 diagnostic parameters that can be accessed by pushing the Diagnostic button sequentially.
9. The Inspect Cell LED flashes when the salt level is 2300ppm or less, indicating that chlorine production is halted.

In summary, the Hayward Aqua Rite Salt Chlorine Generator is a reliable water treatment system that requires regular maintenance to ensure optimal performance.